To utilise more contemporary, better, and more complex Canon printers, you must first complete the setup process. This important procedure involves a lot of phases. For the setup to be successful, each step must be completed. In order to learn more about How to Connect a ij start canon ts3122 chromebook Printer, please read the following information carefully.

How Can I Set Up My Canon Pixma TS3122 Wirelessly?

Before continuing, you must finish setting up your computer or Mac's wireless printer for use with your ij start canon ts3122 chromebook. The printer should first be taken out of its packing and turned on. Once switched on, an LED light will start to glow. Place the printer driver installation CD that was included with the device into your computer before continuing. You may still get the driver CD from Canon's official website if it wasn't included with your purchase. Once the application has been installed, click the "set-up link" and then type the printer's name. To complete the printer configuration, take the following actions:

Step 1: Choose "Connect the printer to the Windows PC" from the menu to get started.

Step 2: Next, choose your native country or region.

Step 3: The next page has a comprehensive list of terms and conditions. Click the "Agree" button if you agree with them.

Step 4: A dialogue box will appear asking you to deactivate the block function if your machine is running security software. Simply check the box, then select the next choice.

Step 5: The wireless software window will show up in the next step. Choose "Yes" from the option in order to connect to the wireless network.

Step 6: At this point, the drivers will begin to install. Finishing this might take some time.

Once the Canon TS3122 wireless setup is finished, you may now connect the printer to wired or wireless devices to print documents.

What's The Wifi Connection Process For A Canon Ts3122 Printer?

Now that we have configured the wireless Canon printer, it is time to learn how to connect the Canon TS3122 printer to wifi on a variety of platforms, including Windows and Mac.

Using Windows

We'll begin by discussing a detailed instruction for configuring WiFi on Windows for Canon printers. Make sure you carefully follow the instructions below:

Step 1: In the first step, turn on your Canon Pixma ts3122 printer. Verify that the green light on the top of the device is flashing.

Step 2: Press the printer's "Stop" button to put an end to the operation.

Step 3: Press and hold the printer's "direct" button for two to three seconds after the light stops flashing.

Step 4: The printer will enter wifi mode instantly after you press the "direct" button. A blinking wifi icon may also be seen on the printer's tiny digital screen.

Install the Canon drivers.

Step 5: The next step is to configure the drivers on Windows 10. You have the choice of downloading the application from Canon's official website or installing it from the printer driver installation CD, as was previously mentioned.

Step 6: Run "setup" right away, and then input the name of your printer. The name of the PC you are using to launch the drivers for the first time must also be entered in this section.

Step 7: To complete the process, choose "connect the printer to Windows PC" in the next step.

Step 8: In the following box, click "download" to start the driver installation process. Hold off until the drivers have been installed. The complete process can take more time.

Step 9: After the download is finished, open the file from your downloads folder to continue.

Step 10: Launch the installation now and watch for it to finish. After installation, select the country where you are currently residing and continue.

Step 11: The next window contains the terms and conditions. Please read them carefully and click the accept button to proceed.

Step 12: At this point, a window showcasing wireless software will appear. Choose "yes" to establish a wireless network connection.

Step 13: The following page will provide a selection screen for a wi-fi connection. Search for your wifi device to find it.

Step 14: After entering the network password,  click the next button.

Step 15: At this point, the wifi settings on your PC have been used to set up the Canon TS3122 printer. So you can start printing papers wirelessly.

Last Words

The Canon Pixma ts3122 printers, for example, make printing easy and wonderful for you. As a consequence, you may benefit from high-quality printouts both at home and at work. However, you must first properly configure a ts3122. Direct connection or using the WPS button on your router are the two ways to connect your Canon printer to a wifi network. If you are a new user of these devices, you must read the user manual that is included with them. Additionally, you may activate the ts3122 setup and connect it to wifi on a Windows PC using the previous procedures.

References: Connect Canonts3122 Printer To Chromebook