You're not the only one who has tried to print a document only to be confronted with an error message stating that your HP printer is not available. To know more about hp printer problems and solution. However, Printer offline problems are frequent and can be caused by a number of things. So, if you are one of those who are running into the same problems, don’t worry.

Ways to deal with Reset HP Printer to Factory Settings:

• With your printer turned on, withdraw the power rope and unplug it from the divider outlet.
• Dispense with the USB connection, if present. Keep it together for 2-3 minutes, and a short time later press and hold the Power button on your HP distant printer for around 30 seconds.
• Connection the power interface into the divider power source and a while later attachment back the power line to the printer.
• Turn your printer ON and hold on till the printer warm-up period finishes and a while later rapidly move to the accompanying stage to present your HP printer programming. You have around 120 minutes to complete the item plan measure using the HP auto far-off partner component.

How to Clean the Clogged Printhead:

As said at the beginning of this article, the clogged printhead is also among the most common causes of the HP printer not printing color problem. Therefore, to resolve the issue, clean the clogged printhead by following the steps shared here.

• Load a white paper in the printer input tray.
• Go to the printer Control Panel and open Setup.
• Next, go to Tools and choose the Clean Printhead option.
• Select OK to continue the cleaning process.
• After the cleaning process is complete, the printer prints a page to check the printing quality. If the print quality does not seem fine to you, then reclean the printhead.

How to Update the Printer Driver

Here come the most recommended solution for all printing problems. After updating the printer driver, surely there will be no need for further HP printer troubleshooting. But it can happen only when you update the driver correctly. In case the driver is updated incorrectly, then the situation may become worse. Therefore, we suggest you update the driver automatically using Bit Driver Updater. This software updates all the drivers with one click of the mouse and makes the computer perform smoother than ever. Here is how to use it.

• Download and install Bit Driver Updater from this link.
• Let it scan your computer automatically, or perform the scan on your own by selecting the Scan option.
• Wait for a few seconds.
• After the scan results pop up, choose the Update Now option located alongside the HP printer driver.

How to do HP Printer Troubleshoot:

• Paper jam – one of the most common but easily solvable problems, a paper jam is mainly due to the incorrect placement of papers in the tray or the roller. When you have such a problem, just open the printer drum and try to gently pull out the obstruction. To know more about hp printers troubleshooting guide. 
• Blank pages between printed pages – there might be instances where your printer might be spewing out an extra piece of blank paper between your commanded print documents. This can be fixed by deselecting the separator pages from the printer preferences in the printer settings menu.

Conclusion: We attempted to assist you in resolving one of the most annoying issues consumers are now experiencing; namely, the HP printer not printing in black color, through this post.