A smart all-in-one inkjet printer with cutting-edge technology is the Canon Pixma Series MX490 model. Whatever the case, it is useless without the correct Canon MX490 Setup procedure. This cutting-edge, multifunctional device is incredibly powerful and guarantees exceptional performance. It is a cutting-edge printing device with unmatched connectivity possibilities. Due to its amazing versatility, it may be used with any computing device. Examples include computers, tablets, laptops, smartphones, and other hardware running Windows or Mac. This premium printer also has a tonne of contemporary features. Consider features like Google Cloud Print, Airprint, Quiet Mode, Auto Scan, My Image Garden, Fine Ink Cartridge, and others.

Instructions For The Canon Mx490 Printer's Initial Setup

To set up a Canon MX490 printer, you must first have a solid, quick internet connection. To use with wired networks, the printer has USB Connectivity options. However, it is advised that you pick a wireless network that offers you total independence and adaptability. By using this method, you may make the most of your high-end printer's features and capabilities. Buy a router that has a physical WPS push-button if at all feasible. The Canon MX490 printer setup will be simpler as a result.

You need a computer and an active network connection in order to utilise your printer. Because you have total connection freedom with this printer type. As a consequence, you may choose a desktop computer, laptop, or mobile device based on your requirements and preferences. But first, you need to join the chosen laptop or computer to your home network. In order to maximise efficiency, you may set a number of devices to use the Printer simultaneously. As a result, you'll have to join the same Internet network with all of these gadgets. Additionally, you must download and install the Canon Pixma Mx490 Installation Download Package on each connected device for optimum performance.

Step 1: Installing Hardware

Like any other technological gadget, canon printers are incredibly delicate and sensitive. To put it another way, they must handle it very carefully, especially when moving the device. Therefore, when you purchase a Canon printer, you receive a carefully packaged device to prevent damage. As a result, the appropriate unboxing of the Canon MX490 Printer is the first step in the setup process. Therefore, find a secure spot for your printer before you start the procedure. This site must be reachable across the service area of your Internet network. Additionally, seek for a flat, secure surface, like a table. Additionally, this place has to be close to a solid power supply, such a wall outlet.

In order to start the Canon MX490 Printer Setup procedure, locate one and gently insert your printer into it. After that, carefully remove the machine's box. Simply connect it to a power source after removing the box and safety tapes. Use the Power Cable that is included for this. Press the "Power" button to turn on the printer after that. Its "Power Lamp" will therefore appear. Make sure it is steady and a bright green colour. Install the "Paper Tray" on the device and fill it with the suggested Paper Sheets. The printer kit's four included ink cartridges must then be properly inserted. The printer must be started up and aligned before you can move forward. The setup manual will then appear in the printer's control panel. A few alternatives for the Printer's default settings will be shown to you for selection. Press "End" to end the setup procedures for the Canon MX490 printer once the necessary settings have been made.

Step 2: Installing Wireless Setup and attaching the printer to the network

Networking solutions for the Canon MX490 Printer, particularly Wireless Setup through ij.start.canon, are known for their versatility. Therefore, it's crucial to select the optimal method based on the connectivity options offered by your router. Here are two straightforward connection strategies.

Step 3: Get The Canon Mx490 Printer Driver And Install It.

• Use your computer and printer as usual. Make sure they are both connected to the same Internet network as well.
• Put the installation CD that was given in the CD drive of your computer.
• The Auto-play box will therefore be visible. If it doesn't open, though. then search for the CD Drive option on your PC. Click it twice to bring up the Setup window.
• Click the "Language" option as soon as possible. Next, pick the language of your preference.
• Press the "Next" button after that.
• "Select Your Place Of Residence" is the next stage. Therefore, make your decision and press "Next."
• Choose your "Country" from the drop-down option after that. click "Next" after that.
• The list of programmes that are available for installation will then be shown by the Installer. Choose one piece of software or employ them all as a consequence. Therefore, choose "Select All" and then click "Next."
• Click "Next" after reading the "License Agreement" for the Canon MX490 Printer Setup.
• Click "Next" when prompted to approve the installation of the Canon printer software.
• The installation will thus start. Watch for it to finish.
• Restart the computer to complete.

References: Canon Pixma Mx490 Driver Free Download