Canon is a well-known brand that produces a wide range of imaging and optical products, including printers, cameras, camcorders, and more. "IJ" usually stands for "Inkjet," which is a type of printing technology commonly used in Canon printers. The URL " https//ij.start.canon " might be associated with the setup, installation, or support of Canon inkjet printers.

IJ start Canon" is a commonly used phrase to refer to the initial setup process for Canon printers. "IJ" stands for "Inkjet," which is the type of printer technology used in Canon inkjet printers. During the setup process, you typically need to connect the printer to your computer, install the necessary drivers and software, and configure the printer settings.

To perform the "IJ start Canon" setup, follow these general steps:

1. Unbox the printer: Remove all packaging materials and protective tapes from the printer.

2. Power on the printer: Connect the printer to a power source and turn it on.

3. Install ink cartridges: Follow the printer's manual or on-screen instructions to install the ink cartridges.

4. Connect to the computer: Use a USB cable or connect the printer to your Wi-Fi network, depending on the printer model and your preference.

5. Download and install drivers: Visit the official Canon website and find the support section. Look for the drivers and software specific to your printer model and download them. Install the drivers and software on your computer.

6. Follow the on-screen instructions: The software installation wizard will guide you through the setup process, including connecting the printer and configuring the settings.

7. Test the printer: Print a test page or document to ensure that the printer is set up correctly and working.

Keep in mind that the specific steps may vary slightly depending on your Canon printer model and the operating system of your computer. Always refer to the printer's manual or the official Canon support website for the most accurate and up-to-date instructions for your particular printer model.

To set up your Canon printer, follow these steps:

1. Install ink cartridges: Open the printer's cover, and carefully install the ink cartridges that came with the printer. Make sure you follow the instructions provided in the printer manual or on-screen instructions if your printer has a display.

2. Load paper: Place a stack of compatible paper into the paper tray of the printer. Adjust the paper guides to fit the paper size.

3. Connect to a computer or network: There are usually two ways to connect your printer:

   • USB Connection: Use a USB cable to connect the printer to your computer. Windows or macOS should automatically detect and install the necessary drivers. If not, you can download the drivers from the Canon website.
   • Wireless Connection: If your printer supports wireless connectivity, you can connect it to your Wi-Fi network. Access the printer's settings using the printer's display or web interface to set up the Wi-Fi connection.

4. Install drivers and software: If your operating system did not automatically install the printer drivers, you can download them from the Canon website. Go to the Canon support website, find your printer model, and download the latest drivers and software for your operating system.

5. Complete the setup: Once the drivers and software are installed, run any setup wizards or utilities provided by Canon to finish the printer setup. To know more about ij.start.canon

6. Test the printer: Print a test page or document to ensure that the printer is working correctly.

Remember to follow the specific instructions for your Canon printer model, as the setup process may vary slightly between different models. Also, keep the printer manual and any additional documentation that came with the printer for reference.